How to Create Your Own Dog Mask - The Basics

In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks that you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the home, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so you get something which resembles a cone. The main thing here is to be realistic with what type of paper plate that you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can make certain that nothing will leak once you place the mask on. Be sure that the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you’re done, so you don’t wind up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Make sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands here out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too big or else it could look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain that the ears are flat and be certain it is not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask because your pet security, you’ll have to do some sanding to be sure that it’s secure on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.

Leave a reply

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *