In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the home, you dogsrecommend.com/dog-mask need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it is actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so that you get something that looks like a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so that you can make certain that nothing will leak when you place the mask on. Make sure the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so you don’t wind up with smudges or smears on your dog.
Then it’s time to glue the mask on your dog’s head. First you will need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Be certain it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it could look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Be sure that the ears are flat and make sure that it’s not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask because your dog protection, you’ll need to do some sanding to be certain it’s secure on your dog. You can accomplish it by sanding off any excess paper which might have been eliminated from your mask.